The efficiency of the power inverter is directly related to the generated energy of the system, so it is an important indicator that many people care much about. It is of great importance to increase the conversion efficiency of the power inverter.
The only way to improve the efficiency of power inverters is to reduce the losses. The main losses of inverters come from IGBT, inductance and other power switch tubes, as well as magnetic devices such as transformers and inductors, which is related to the current, voltage and the process adopted by the selected materials.
|IGBT||Switching loss (dynamic)||Switching frequency, DC voltage||Multi-level, control strategy|
|IGBT||Conduction loss (static)||Current, component internal resistance||Soft switching, new component|
|Inductance||Iron loss (no-load loss)||Capacity, magneto resistance||Improve switching frequency and magnetic conductive material|
|Inductance||Copper loss (load loss)||Current, internal resistance||Good conductive materials|
It can be divided into conduction loss and switching loss. Among them, conduction loss is related to internal resistance and current passing through components, while switching loss is related to switching frequency of components and DC voltage endured by components.
It can be divided into copper loss and iron loss. Among them, copper loss refers to the loss caused by resistance of inductance coil. When current is heated by passing through the resistance of inductance coil, part of electric energy is transformed into heat energy and lost, and because the coil is usually wrapped by insulated copper wire, it is also called copper loss, which can be calculated by measuring the short-circuit impedance of transformers. Iron loss includes two aspects: hysteresis loss and eddy current loss, which can be calculated by measuring the no-load current of transformers.
Techniques to improve the efficiency of inverters
At present, there are three technical routes to improve the efficiency of power inverters.
- First, space vector pulse width modulation and other control methods are used to reduce loss.
- Second, components of silicon carbide materials are used to reduce the internal resistance of power devices.
- Third, three-level, five-level, multi-level electrical topology and soft switching technology are adopted to reduce the voltage at both ends of power devices and the switching frequencies of power devices.
Space vector pulse width modulation (SVPWM)
SVPWM is a fully digital control method with the advantages of high utilization rate of DC voltage and easy control, which has been widely used in power inverters. With high utilization of DC voltage, lower DC bus voltage can be used under the same output voltage, which reduces the voltage stress of power switching devices, reduces the switching loss on devices and improves the conversion efficiency of power inverters to a certain extent. In space vector synthesis, there are many combinations of vector sequences. Through different combinations and sorting, the effect of reducing switching times of power devices can be achieved, which can further reduce the switching losses of power devices of power inverters.
Adopting components made of silicon carbide material
The impedance per unit area of silicon carbide devices is only one percent of that of silicon devices, and IGBT (insulated gate bipolar transistor) and other power devices made of silicon carbide can reduce the on-state impedance to one tenth of the conventional silicon devices. Since silicon carbide technology can effectively reduce the reverse recovery current of diodes, the switching loss of power devices and the current capacity required for the main switch can also be reduced. Therefore, the anti parallel diode with silicon carbide diode as the main switch is the way to improve the efficiency of power inverters. Compared with traditional fast recovery anti parallel diode, the anti parallel diode made of silicon carbide can significantly reduce the reverse recovery current and improve the total conversion efficiency by 1%. After using fast IGBT, the conversion efficiency of the whole machine can be improved by 2% due to the acceleration of switching speed. When the SiC anti parallel diode is combined with the fast IGBT, the efficiency of power inverters will be further improved.
Soft switching and multilevel technology
By resonance principle, soft switching technology can make the current or voltage in switching devices change according sine or quasi-sine law. When the current crosses zero naturally, the device is turned off, and when the voltage crosses zero naturally, the device is turned on, thus reducing switching loss and solving the problems of inductive disconnection and capacitive opening. Moreover, there is no switching loss in the switch when the voltage at both ends of the switch or the current flowing through the switch is zero, the switch is turned on or off. Three-level powewr inverters are mainly used in high voltage and high power scenarios, which increases zero-level output and reduces the voltage stress of power devices by half compared with the traditional two-level structure. For this reason, three-level inverters can adopt smaller output filter inductance than two-level inverters under the same switching frequency, which can effectively reduce inductance loss, cost and volume. Meanwhile, three-level power inverters can adopt lower switching frequency, lower switching loss and higher conversion efficiency than two-level power inverters under the same output harmonic content.